Instructions for setting up this phone model (necessary for the correct background operation of the Wire APP)
Open your phone settings. Add WIRE to the list of protected apps under Power Saver (or Battery/Power Manager) and/or Protected Apps.
Disable power saving mode for WIRE in general battery settings (power saving).
Open your phone settings. Go to Battery and disable power saving for WIRE.
In the Battery section, click the settings icon in the upper right corner, then uncheck the Close power-consuming applications checkbox.
Open your phone settings. Go to the Applications section, select WIRE, open the Battery item and turn off the Report power consumption and Close after screen lock item.
In the Screen Lock menu, make sure the WIRE is not turned off (the switch is off).
Open your phone settings. Select Battery - disable power saving for WIRE.
Click Start, then select WIRE from the listenable manual control and check all the boxes (autorun, work in the background).
Open your phone settings. Select Applications - WIRE - in it the Battery item - turn off Notify about power consumption, Close after a screen lock. If you see the item Battery saving - click it and then in WIRE select - Do not save.
Open your phone settings. Select Applications. Select Special Access - Battery Saver - go to Do not save battery and in the WIRE application select Do not save.
Tap the settings button in the upper right corner and turn off Notify about power consumption and Close apps on screen lock (if available).
Open the Phone Manager application on the phone's desktop - click Memory Cleanup, then click the settings icon in the upper right corner and uncheck the Auto-Delete box.
Depending on the specific model and version of the update, the phone settings may differ:
For all phones (for all customization options)
Pin the WIRE application so that it is not unloaded from memory during cleanup (it does not happen on all models):
- Open the list of running applications (usually opened by pressing the touch button in the form of a square)
- Click on the lock icon in the header of the WIRE application (to close it). If there is no lock - pull the application down, the lock will close.